SCR#3

2. Place the fuselage between the two pieces of cardboard on top of the bottom wing and tape it all together securely. The end of the cone should line up with the back edge of the wing. The bottom end of the soda can will stick out a short distance from the front edge of the wing.

3. Bend the landing gear legs out slightly.

4. Tape the top wing to the top of the cardboard sides. The top wing on these old airplanes is usually forward of the bottom wing. You can cut off the extra cardboard in the back.

Struts and dihedral:

1. Cut two rectangles that are 1” wide by 3” long.

2. Tape the struts between the wings near the ends (but not on the ends).