SCR#3

2. Explore:

Work in pairs to build an antique airplane:

Make the Fuselage:

1. Set a compass to 8”.

2. Put the point of the compass in the middle along the long edge of a piece of paper and draw an arc.

3. Draw a straight line from the place where the point of the compass was placed and where the arc goes off the paper on each edge.

4. Cut out the arc and straight sides and roll it into a cone.

5. Adjust the size of the cone until the bottom fits nicely on top of an aluminum soda can. It will be easier if the cone is slightly larger than the diameter of the can.

6. Tape the side of the cone together and then tape it to the top of the can. Try to get it straight.

Made with FlippingBook - professional solution for displaying marketing and sales documents online